top of page
Nitrogen_Generator_Tanks_Equipment Fabrication Solutions.jpg

Industrial Applications

PRODUCTS

Amec_Industries_Modular_Oxygen_Generator_MGS.jpg

Modular Nitrogen Generator

Our modular nitrogen generators are designed for users whose nitrogen consumption tends to increase over time.


Thanks to its aluminum carbon molecular sieve tanks, it has been serving for years with maximum performance without corrosion. 

It has minimum air consumption and minimum pressure loss thanks to its uniquely proportioned CMS tanks. 

Nitrogen Purity up to 99.9999%

Production capacity can be increased.

Low air consumption rate.

Technicial Specifications

  • Pressure and flow control for intake air 

  • Aluminum molecular sieve tanks

  • Low energy consumption and minimal footprint

  • Siemens PLC and KTP 700 touch screen - Standard

  • Nitrogen production capacity can be increased,

  • Intake air quality control and protection system according to ISO 8573

  • Gas purity control and low purity protection system

modular_gas_generator_amec_industries.jpg

Siemens PLC

Siemens S7 1200 series PLC, suitable for harsh working conditions, is used as standard in all our gas generators.

siemens_s71200_plc_oxygen_generator.jfif
made_in_germany.jpg

Siemens - 7" Touch Screen

simatic-hmi-basic-panel-ktp1200-front.jpg

Siemens KTP 700 series 7" touch screen, suitable for harsh working conditions, is used as standard in all our gas generators.

Aluminum CMS Tanks

Carbon molecular sieves (CMS) filled in 6000 series aluminum pipes with high corrosion resistance have been working safely for many years.

zeolite_column_modular_psa_oxygen_generator.jpg

High Quality Valves

Stainless steel, high quality process valves that can open and close 1,000,000 are offered as standard.

smc_valve_amec_industries_nitrogen_generator.jpg

Zirconia Oxygen Analyzer

Accurate and consistent measurement with Zirconia sensor technology
0-21%  -  0-1%  - 0-1000 ppm, measurement possibility.
No need to change periodically

zirconia_oxygen_sensor_amec_industries.jpg
dewpoint_anayzer.jpg

Inlet Air
Control System

With the built-in dewpoint analyzer, the inlet air quality is measured instantaneously, in case the dwewpoint value is above +3C specified in ISO 8573 class 1.4.1, it is automatically evacuated in order not to damage the zeolites, and when it returns to normal, it is sent to the oxygen generator.

Air Conditioning

Flow control valves  are used to adjust the supply air flow .

smc_flow_kontrol_valfi.jpg

Electronic Flowmeter

Stainless Steel Piping

Electronic flow meters are used to monitor and record the amount of oxygen produced and / or the inlet air flow rate instantly and cumulatively.

Flowmeter_Oxygen_Generator.jpg

In order to obtain manufacturing in accordance with international standards, SS 304 and SS 316 quality stainless fittings and piping are used in our modular oxygen generators.

Oil Mist Analyzer

The safety of the system and the user is guaranteed by measuring the oil  vapor up to 2.5 mg/m3 so that the oil vapor coming from the compressed air system does not cause zeolite destruction.

Capacities - Nm3/h  - 7.5 bar Inlet Air

The definition of Nm³ is calculated based on reference conditions of 20 °C, 101.325 kPa(a) and a dry basis.
The specified flow rates are valid for generator operation at 20 °C / 60 °F, 1013 mbar / 14.7 psi and 60% RH atmospheric conditions.

Capacities - Nm3/h  - 10.0 bar Inlet Air

The definition of Nm³ is calculated based on reference conditions of 20 °C, 101.325 kPa(a) and a dry basis.
The specified flow rates are valid for generator operation at 20 °C / 60 °F, 1013 mbar / 14.7 psi and 60% RH atmospheric conditions.

bottom of page