Modular Oxygen Generator
Our modular oxygen generators are designed for users whose oxygen consumption tends to increase over time.
The lowest production capacity is 2.5 Nm3/h and the maximum production capacity of a single machine is up to 15 m3/h.
Thanks to the modules added side by side after 15 m3/h capacity, the production capacity can be increased up to 150 m3/h.
95% Oxygen Purity
Production capacity can be increased.
Low air consumption rate.
Pressure and flow control for intake air
Aluminum molecular sieve tanks
Low energy consumption and minimal footprint
Siemens PLC and KTP 700 touch screen - Standard
Oxygen production capacity can be increased,
CO, CO2 and Dew Point analyzer
Intake air quality control and protection system according to ISO 8573
Oxygen purity control and low purity protection system
Siemens S7 1200 series PLC, suitable for harsh working conditions, is used as standard in all our gas generators.
Siemens - 7" Touch Screen
Siemens KTP 700 series 7" touch screen, suitable for harsh working conditions, is used as standard in all our gas generators.
Aluminum Zeolite Tanks
Zeolites filled in 6000 series aluminum pipes with high corrosion resistance have been working safely for many years.
High Quality Valves
Stainless steel, high quality process valves that can open and close 1,000,000 are offered as standard.
Zirconia Oxygen Analyzer
Accurate and consistent measurement with Zirconia sensor technology
Possibility of measurement in the range of 0-95%
No need to change periodically
With the built-in dewpoint analyzer, the inlet air quality is measured instantaneously, in case the dwewpoint value is above +3C specified in ISO 8573 class 1.4.1, it is automatically evacuated in order not to damage the zeolites, and when it returns to normal, it is sent to the oxygen generator.
Flow control valves are used to adjust the supply air flow .
Stainless Steel Piping
Electronic flow meters are used to monitor and record the amount of oxygen produced and / or the inlet air flow rate instantly and cumulatively.
In order to obtain manufacturing in accordance with international standards, SS 304 and SS 316 quality stainless fittings and piping are used in our modular oxygen generators.
CO, CO2, Dewpoint Analyzer
Oil Mist Analyzer
The safety of the system and the user is guaranteed by measuring the oil vapor up to 2.5 mg/m3 so that the oil vapor coming from the compressed air system does not cause zeolite destruction.
The amount of CO and CO2 in the decomposed oxygen and the dewpoint value of the oxygen are continuously measured. Amec Industries fully fulfills the requirements of the European Pharmacopoeia.
The definition of Nm³ is calculated based on reference conditions of 20 °C, 101.325 kPa(a) and a dry basis.
The specified flow rates are valid for generator operation at 20 °C / 60 °F, 1013 mbar / 14.7 psi and 60% RH atmospheric conditions.